Porsche Cayenne Forums banner

Cayenne PCM3.1 Wireless Carplay&Andriod auto module installation tutorial

694 Views 6 Replies 5 Participants Last post by  ElderWhitehead1
6
Before installing the CarPlay module, I reviewed a lot of YouTube tutorials and thought it would be very fun if I could install it myself. I also wanted to do some challenging things. The point is that can save a lot of costs. I didn't investigate the cost of local installation, but I guess it will not be low.
I chose Carlinkitlife.
Their module has the following advantages compared to others:
1. The price is more reasonable, less than $350.
2. You don't have to do wiring to link to a fuse and get power
3. Doesn鈥檛 require external unit such as joyeauto.
4. The board itself is well made and the and components are looking great.

This is the purchase link:

This is all the accessories I received:
Hood Automotive lighting Automotive tire Fender Electrical wiring


The most complex part of the entire process was connecting the board, but the instructions they provide explain this in great detail.
Product Font Poster Material property Advertising



NOTE: Before the installation, TURN OFF the engine, close and opendriver side door ONCE. wait the center screen turn black.







Car Gear shift Motor vehicle Automotive design Hood


1.Use the tool to take out the air conditioning panelof the central control






Sensitive content, not recommended for those under 18
Show Content
Gesture Finger Gadget Thumb Wrist

2.Note that vou need to take out the plug behind the panel






Automotive design Gadget Audio equipment Motor vehicle Vehicle audio

3.Unscrew the 4 screws on the head unit






Hand Vehicle Automotive design Satellite radio Gadget

4.Take out the head unit and unplug all the plugs on the back of the head unit
See less See more
1 - 7 of 7 Posts
10


5.Unscrew the screws on the screen of the head unit




6.You need to press the buckles on both sides of the screen to remove the screen




7.Be careful remove the screen,but don't break the harness



8.Unscrew the screw on the back of the head unit




9.Take the head unit apart



10.remove the cables
See less See more
16

11.Remove the three screws at the mark and install the golden extension screw


12.Install the carplay module and screw on the screws


1

13.connect the Carplav flat cable to the PCB board


14.Connect the screen flex cable to the carplay module.



15.Connect the line to the PCB board



16.The installation in the head unit is comnleted , and the head unit can be restored



17.If there is an optical fiber cable on the original car main line you neea to take out tne opticat fiber cabte



18.Connect the Carplay main line with the main line of the oriainal car



19.transfer the fiber optic cable remoed from the original Car main line



20.Reconnect the plug from the original car head unit to the head unit



21.Unscrew the screws on the floor of the passenger cab and remove the floor



22.The USB cable on the CarPlay main line can be led from the central console
to the floor of the passenger cab




23.Microphones can be placed here, and the microphone harnesses are routedand routed into the center console(f the original car's Bluetooth phone can be used normally.the original car's microphone can be used without an external microphone)




24.comnect microphone



25.After the CarPlay installation is completel you can restore the original car layout



26.enjoy carplay
See less See more
  • Like
Reactions: 1
Other kits don鈥檛 require extra microphones. Just sayin鈥欌

11.Remove the three screws at the mark and install the golden extension screw


12.Install the carplay module and screw on the screws


1

13.connect the Carplav flat cable to the PCB board


14.Connect the screen flex cable to the carplay module.



15.Connect the line to the PCB board



16.The installation in the head unit is comnleted , and the head unit can be restored



17.If there is an optical fiber cable on the original car main line you neea to take out tne opticat fiber cabte



18.Connect the Carplay main line with the main line of the oriainal car



19.transfer the fiber optic cable remoed from the original Car main line



20.Reconnect the plug from the original car head unit to the head unit



21.Unscrew the screws on the floor of the passenger cab and remove the floor



22.The USB cable on the CarPlay main line can be led from the central console
to the floor of the passenger cab




23.Microphones can be placed here, and the microphone harnesses are routedand routed into the center console(f the original car's Bluetooth phone can be used normally.the original car's microphone can be used without an external microphone)




24.comnect microphone



25.After the CarPlay installation is completel you can restore the original car layout



26.enjoy carplay
Fantastic write-up & pics. TY!
Great post!!

Can you use the unit when the engine is turned off?

Thanks
1 - 7 of 7 Posts
Top