Porsche Cayenne Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
SBB key programmer is a universal key programming tool that can even make key even if all of keys lost, because SBB interface is to insert into the OBD diagnsotic socket to read chip data.

Here takes an example of Toyota Smart Key 93C46 chip as an example to display how to remove eeprom chips.

No need install software, power by USB connection.

1. Remove eeprom 93C46 chips from IMMO ECU and wire it to corresponding position on SBB V33 immobilizer key programmer. Place the key on the sensing area, press the 93C46 black button and initilize the key.

2. Remove eeprom 93C86 chips from BOX ECU and wire it to corresponding position on device. Place the key on the sensing area, press the 93C86 black button and initilize the key.

3. Please wire two chips back to your car after complete initilizing key.

4. Use Slica SBB Key maker device to match your car key. (T300 and MVP Key Pro M8 key programmer in our webpage can also project this function)

5. Now you can start your car with new key.
 

·
Registered
Joined
·
22 Posts
SBB key programmer new released SBB Pro2 key programmer support new cars to 2017.12

How to use SBB PRO2 immobilizer programmer to make keys:

1) Before running SBB PRO2 key programmer, please insert the blank new key into your car keyhole;
2) Turn on ignition switch;
3) Insert SBB 16-pin interface into your car OBD2 diagnostic seat.
4) Follow the instructions showed on the SBB screen.
SBB PRO2 key programmer copies chip according to car model, and it programs key not clones key, you only needs to insert SBB 16-pin interface into your car OBD2 diagnostic seat, then read out immobilizer pin code from immobilizer dump/EEPROM of the car before writing it into new blank key. When programming for Ford vehicle, it does not need pin code.
 
1 - 3 of 3 Posts
Top